Typically, the whirlpool stove functions by using coils made of copper or aluminum. When electrical current passes through the metal coils, the metal becomes hot and heats up the surrounding air that has been pulled over the coils. The heated air is then distributed to different parts of your home, such as your kitchen or bathroom.
Your stove is not heating up properly when there is a problem with either the electrical connection between the source and the oven, the coils themselves, or problems in any part of its internal mechanism that allows for the transfer of heat. Here, we try to troubleshoot the problem of the stove not heating up.
Here are the steps.
Verify that all connections from your power source have been established and secured. If there is a problem with these connections, then the coils will not be receiving current and hence will not heat up or produce any heat for distribution within your home. Be sure you have also checked all switches which would normally control heating. If they are found to be faulty, it is advisable to have them checked out by a professional electrician before you begin any repairs.
In case your stove is running on gas, and there’s no spark being produced at the burner head, then the problem could also lie with the control valves that operate at both ends of its metal tubes. If this is the case, then it may be advisable to have them repaired or replaced by a professional gas fitter.
The coils themselves are also known to develop issues that will prevent heat from being properly distributed within your home. If you find any signs of these problems, it is recommended that you get them checked out as soon as possible by a professional service specialist.
If all these measures fail, then the problem could lie with the control unit used for heat transfer or with any part of its household circuitry that would be responsible for transferring heat from the coil to different parts of your home. In this case, it is recommended that you have a qualified service technician perform a thorough check-up of the stove’s internal mechanism.
Advance Appliance Ltd. has been serving the needs of their customers for many years with a wide range of brands and types of appliances, including refrigerators/freezers; clothes washers & dryers; dishwashers, ovens, stoves, etc. You can get their services as well if you do not want to take the risk.
Precautions While Handling Your Stove
Here are some general precautions you need to follow when handling your stove:
1) Make sure that your stove is disconnected from any form of electricity supply before you start working on it. Be sure to switch off the breaker first, and then go ahead with removing its power cord from a stable source of power supply. Failure to do so may result in severe injury or even death.
2) Check to see if there are any gas leaks before you light up your stove again. Gas leaks may be indicated by small bubbles formed around connections and at the burner head. If this is found, then get these areas repaired by a professional service specialist. Also, check for any loose connections near the burner head that could be a fire hazard.
3) Be sure to have the stove checked out every now and then by a professional service specialist. If you use it frequently, this may help prevent any future problems from escalating.
While the cause of a stove not heating up may vary from case to case, it is usually a good idea to have your oven checked out by a professional appliance repair service specialist. If you are from Edmonton, then it is recommended to visit appliance repair Edmonton like Advance Appliances LTD who are experts in what they do